Used Unitek Miyachi Welding Controls

Model	Tested
PM 3, 1-220-01	$1,500
PM 4, 1-230-02	$2,250
PM 5, 1-234-02	$2,750
PM 6, 1-237-02	ask
PM 7, 1-240-01	$3,200
CS-1300	$750
CY-150A	$1,000
CY-210A	$1,100
CY-210B	$1,200
IS-221A	$3,200
HF2	$3,200

Weld Heads

Model	Tested
127	$300
02-143-04-10	ask
02-146-03 86F	$950
02-151-01	$950
2-163-01-07	ask

Unitek THIN-LINE Series 80 are precision, low inertia, force-fired Weld Heads with a narrow vertical profile. The 1-3/4 inc )(45 cfm) width, 1 in. (2.5 cm) stroke, 20-40 pound maximum force range and throat depth allow their use in a wide variety of precision resistance welding applications. 02-151-01 is the Series 90. Unitek micropull wire bond pull tester, 6 092 03 carriage is available, without pull tester: $150.

Welding Transformers

Model	Tested
Dengensha WT3 CS6.2	$750
IP-205A, front	$550
MT-510A	$550
MT-520A	$550
IT-202A	$500
IT-205A-D	$500
IT-510B	$750
IT-540M	$750
09-004-01-00	$550
MT-5CA	ask
SC-70T-2	ask
SC-90	ask
Unipulse 9-006-01	$550
Unipulse 9-015-02	$550
Unipulse 9-007-01	$550
Unipulse (29 Amp)	$950

Unitek, Miyachi and Degensha welding transformers.

Unitek Equipment Specifications

Item	Voltage	Frequency Range	Kva	Duty Cycle	Amps
Unipulse	115/230	50-60Hz	2	8%	4.35/8.7
Unipulse	460	50-60Hz	16	8%	29
Phasemaster 3	115	60hz		50%	15
Phasemaster 4	115	50-60hz	2.5	50%	21
Phasemaster 6		50-60hz
Phasemaster 7	460	50-60Hz	32	8%	70

Read information from Unitek on the HF2 kHz High Frequency weld control power supply.

Digital Manuals

Phasemaster 7 Tech Manual Operation instructions
Thin-Line Weld Heads Operation instructions

home index: A-M-Z e-mail PTB Sales toll free: 866-332-0500